| Depth rating: | 5,500’ w / 4 ½” drill pipe (depth rating also determined by casing design) |
| Drawworks: | Wilson 42 single drum, grooved for 1 1/8 drill line, powered by Cummins KTA 1150 diesel engine with Allison 955 Torque converter. |
| Substructure: | 8’ high x 38’ long x 14’ wide, I-Beam with 3’ folding walkways |
| Derrick: | Lee C. Moore 103’ double, 225,000 # hook load with fifth wheel king pin |
| Block/Hook: | Sowa 3 sheave 120 ton capacity, 1 1/8" sheaves |
| Swivel: | PC 150 Oil Well |
| Rotary: | 18” x 44” Gardner Denver |
| BOP: | 8” Regan annular, 3000 psi with Single station closing unit |
| Choke Manifold: | 3000 psi |
| Dog House/ Water Tank: |
420 BBL water tank with scoping Top 8’ x 20’ doghouse, knowledge box, drill-o-graph, lockers. |
| Generator #1: | John Deere 4 cylinder (new) 120 KW, electric start, master control panel, complete with distribution switch, panels, and breaker boxes, all mounted in 8’ x 40’ steel house with Quincy air compressor and tool boxes. Masker skidded. |
| Generator #2: | Same as #1 |
| Mud Pump #1: | Emsco D-375 (375 HP), Duplex powered by Caterpillar D-353 skid mounted unitized with pulsation dampener and plumbing. |
| Mud Pump #2: | Same as #1 |
| Instrumentation: | 1 - Satellite automatic driller |
| Handling Tools: | 4 ½ D.P. Elevators and slips, 6 ¼ D. C. Slips, elevators and collar clamp, type C-Tongs w/ 4 1/2 “ to 10” heads. |
| Hoses: | Rotary 3 ½ ID x 55 5000 P.S.I. |
| Mixing Pump: | Baker pump powered by electric motor |
| Fuel Tank Skid: | Fuel tank, lubster, junk box, accumulator, wireline unit |
| Drill Pipe: | 4 ½” OD |
| Drill Collars: | As needed |
| Pusher House: | 10 x 36 x 10 |
| Misc.: | Air Hoist Shale Shaker |
| Location Plat: | Rig #12 Location Plat |
| Revised 2/21/08 |